Your opinion matters
SERIES SUPERCOMBINATA
SC1
from Ø 42mm to Ø 400mm (1,65 "- 15,75")
LINE BORING AND INTERNAL AND EXTERNAL OVERLAY WELDING, FACING OF ORTHOGONAL PLANES AND CREATION OF SEATS FOR SEEGER RINGS, THREADING, DRILLING AND TAPPING, EXTERNAL TURNING
The Supercombinata SC1, with its standard equipment, is suitable to perform line boring and internal and external overlay welding within a working range from Ø 42 mm to Ø 400 mm (also blind holes). It’s suitable for drilling and tapping. By means of extra kits, it is suitable to perform external turning, facing of orthogonal planes and creation of circlips grooves, threading. With additional accessories, the Supercombinata can be adapted to many different needs of our customers. Available with a control panel for 230V or 110V power supply as well as in digital version (discover the differences).
Also available for operating leasing. More information.
SC1
110 V
SC1
Digital
Suitable for any situation
All our mobile line boring machines can be used in any situation to optimise and simplify the performance of all types of machines.
Find out how our customers in different sectors have improved their performance with Elsa
- Earthmoving sector - Discover more
- Marine sector - Discover more
- Mining industry - Discover more
Are you looking for information on another sector? Contact us
Technical specifications
DIAMETERS
Boring bar diameter: ø 40x2200 mm / ø 40x1100 mm
Line boring: ø 42 - 400 mm
External turning: Extra kit
Internal welding: ø 42 – 400 mm
External welding: ø 42 – 400 mm
Drilling: Suitable
Tapping: Suitable
Threading: Extra kit
Facing of orthogonal planes: Extra kit
ROTATION MOTOR
AC motor: Single phase
Power at rated speed: 1800 W
Gearbox: 4-speed
Output torque at the bar: Up to 400 Nm with 95 rpm
FEED MOTOR
Gear motor: DC
Power at rated speed: 90 W
Max Speed: 11 rpm
Feed system: Electromechanical
Feed: Manual/Automatic
WELDING TECHNOLOGY
Spiral: Continuous with variable step
Welding machine: Compatible with MIG/MAG welder with EURO connector
LONGITUDINAL STROKE
Unlimited: With 350 mm pitch
ELECTRONIC CONTROL PANEL
Voltage: 230 V (50 Hz)
Main switch: Available
Emergency switch: Available
Inverter feed: RH/LH
Inverter rotation: CW/CCW
Speed regulator: Rotation/Feed
Electrical absorption: 2000 W
Control panel 110/120 V: Upon request
Digital control panel: Upon request
DIMENSIONS
Length: 680 mm
Width: 250 mm
Height: 390 mm
Weight central unit: 37 Kg
Standard equipment
Qty 1 - Main unit
Qty 1 - Boring machine stand
Qty 1 - Electronic control panel
Qty 1 - Control panel holder
Qty 1 - Cable control panel/machine
Qty 1 - Power cable
Qty 1 - Boring bar ø 40x2200 mm
Qty 1 - Boring bar ø 40x1100 mm
Qty 1 - Boring bar extension 520 mm
Qty 1 - Pivot
Qty 1 - Tool holder for boring d. 100-400 mm
Qty 1 - Special tool holder LH ø 12x40 mm
Qty 1 - Tool holder LH ø 12x40 mm
Qty 1 - Tool holder LH ø 12x60 mm
Qty 1 - Tool holder RH ø 12x100 mm
Qty 1 - Box with 10 cutting inserts
Qty 2 - Main bar support
Qty 2 - Additional support
Qty 12 - Bracket for flanges
Qty 1 - Telescopic shaft for welding
Qty 5 - Diffusor extension 35 mm
Qty 1 - Diffusor extension 100 mm
Qty 4 - Short gas nozzle
Qty 4 - Long gas nozzle
Qty 5 - Short contact tip ø 0,8 mm wire
Qty 5 - Long contact tip ø 0,8 mm wire
Qty 1 - O-ring for welding shaft 100x5 mm
Qty 1 - Terminal lance for external welding
Qty 1 - Centring system for through holes
Qty 1 - Centring system for blind holes
Qty 1 - Telescopic gauge up to ø 400 mm
Qty 1 - Dial gauge
Qty 1 - Dial gauge support
Qty 1 - Set of wrenches
Qty 1 - Screws and bolts
Guaranteed quality up to 5 years
Elsa is confident of supplying quality products, therefore the manufacturer's warranty of up to 5 years can be activated on all portable line boring machines.
Find out how to activate it
Accessory
Boring bar ø 20 x 1800 mm
Accessory
Boring bar ø 30 x 1800 mm
Accessory
Tool holder LH Ø 12x100 mm
Accessory
Tool holder RH ø 12x60 mm
Accessory
Tool holder RH Ø 12x40 mm
Accessory
Special tool holder RH ø 12x60 mm
Accessory
Special tool holder RH ø 12x40 mm
Accessory
Tool holder RH ø 12x50 mm
Accessory
Tool holder RH ø 12x80 mm
Accessory
45° Toolholders Ø12 x 100mm
Accessory
45° Toolholders Ø10 x 100mm
Accessory
Cutting edge for hard material Ø 10 mm
Accessory
Cutting edge for hard material Ø 12 mm
Accessory
Centesimal toolholders DX Ø 16x26 mm
Accessory
Set centring cones for Ø 40 mm shaft, working range Ø 50-130 mm
Accessory
Set centring cones for Ø 40 mm shaft, working range Ø 120-180 mm
Accessory
Set centring cones for Ø 40 mm shaft, working range Ø 170-220 mm
Accessory
Set centring cones for Ø 20 mm shaft, working range Ø 25-40 mm
Accessory
Set centring cones for Ø 30 mm shaft, working range Ø 35-70 mm
Accessory
Long contact tip ø 1,0 mm wire
Accessory
Short contact tip ø 1,0 mm wire
Accessory
Terminal lance Ø 30-50 mm
Accessory
Boring bar ø 20 x 1800 mm
Accessory
Boring bar ø 30 x 1800 mm
Accessory
Tool holder LH Ø 12x100 mm
Accessory
Tool holder RH ø 12x60 mm
Accessory
Tool holder RH Ø 12x40 mm
Accessory
Special tool holder RH ø 12x60 mm
Accessory
Special tool holder RH ø 12x40 mm
Accessory
Tool holder RH ø 12x50 mm
Accessory
Tool holder RH ø 12x80 mm
Accessory
45° Toolholders Ø12 x 100mm
Accessory
45° Toolholders Ø10 x 100mm
Accessory
Cutting edge for hard material Ø 10 mm
Accessory
Cutting edge for hard material Ø 12 mm
Accessory
Centesimal toolholders DX Ø 16x26 mm
Accessory
Set centring cones for Ø 40 mm shaft, working range Ø 50-130 mm
Accessory
Set centring cones for Ø 40 mm shaft, working range Ø 120-180 mm
Accessory
Set centring cones for Ø 40 mm shaft, working range Ø 170-220 mm
Accessory
Set centring cones for Ø 20 mm shaft, working range Ø 25-40 mm
Accessory
Set centring cones for Ø 30 mm shaft, working range Ø 35-70 mm
Accessory
Long contact tip ø 1,0 mm wire
Accessory
Short contact tip ø 1,0 mm wire
Accessory
Terminal lance Ø 30-50 mm
