SERIES SUPERCOMBINATA
SC2 Compact
from Ø 62 mm to Ø 250 mm (2,44" - 9,84")
LINE BORING AND INTERNAL AND EXTERNAL OVERLAY WELDING, FACING OF ORTHOGONAL PLANES AND CREATION OF SEATS FOR SEEGER RINGS, EXTERNAL TURNING
The Supercombinata SC2 Compact, thanks to its standard equipment, is suitable to perform internal line boring and internal overlay welding within a working range from Ø 62 mm to Ø 250 mm in very small spaces (also blind holes). By means of extra kits it is able to perform external turning, facing of orthogonal planes and creation of circlips grooves. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.
Also available for operating leasing. More information.
SC2 Compact
110 V
DIAMETERS
Boring bar diameter: ø 60 x 2200 mm
Line boring: ø 62 – 250 mm
External turning: Extra kit
Internal welding: ø 42 – 250 mm
Facing of orthogonal planes: Extra kit
ROTATION MOTOR
AC motor: Single phase
Power at rated speed: 1800 W
Output torque at the bar: 350 Nm with 100 rpm
1° speed: max 100 rpm (170 Nm)
2° speed: max 340 rpm (50 Nm)
FEED MOTOR
Gear motor: DC
Power at rated speed: 45 W
Max Speed: : 11 rpm
Feed system: Electromechanical
Feed: Manual/Automatic
WELDING TECHNOLOGY
Spiral: Continuous with variable step
Welding machine: Compatible with MIG/MAG wire with EURO connector
LONGITUDINAL STROKE
Unlimited: With 250 mm pitch
ELECTRONIC CONTROL PANEL
Voltage: 230 V (50Hz)
Main switch: Available
Emergency switch: Available
Inverter feed: RH/LH
Inverter rotation: CW/CCW
Speed regulator: Rotation/Feed
Electrical absorption: 2000 W
Control panel 110/120 V: Upon request
DIMENSIONS
Length: 545 mm
Width: 220 mm
Height: 380 mm
Weight central unit: 34 kg
Standard equipment
Qty 1 - Main unit
Qty 1 - Boring machine stand
Qty 1 - Electronical control panel
Qty 1 - Control panel holder
Qty 1 - Cable control panel /machine
Qty 1 - Power cable
Qty 1 - Boring bar ø 60x2200 mm
Qty 1 - Boring bar extension 415 mm
Qty 1 - Tool holder for boring d. 120-250 mm
Qty 1 - Box with 10 cutting inserts
Qty 2 - Main bar support
Qty 2 - Additional support
Qty 1 - Telescopic shaft for welding
Qty 1 - Reduction bushing drawing torch
Qty 1 - Reduction bushing locking torch
Qty1 - Tool holder adjusting bushing
Qty 5 - Diffusor extension 35 mm
Qty 4 - Short gas nozzle
Qty 4 - Long gas nozzle
Qty 5 - Short contact tip ø 0.8 mm wire
Qty 5 - Long contact tip ø 0.8 mm wire
Qty 1 - O-ring for welding shaft 90x5 mm
Qty 1 - Terminal lance for external welding
Qty 1 - Centring system for through holes
Qty 1 - Centring system for blind holes
Qty 1 - Telescopic gauge up to ø 250 mm
Qty 1 - Dial gauge
Qty 1 - Dial gauge support
Qty 1 - Set of wrenches
Qty 1 - Screws and bolts
Guaranteed quality up to 5 years
Elsa is confident of supplying quality products, therefore the manufacturer's warranty of up to 5 years can be activated on all portable line boring machines.
Find out how to activate it
Accessory
External joint for boring bar Ø 30 mm
Accessory
Tool holder LH Ø 12x100 mm
Accessory
Tool holder RH ø 12x60 mm
Accessory
Tool holder RH Ø 12x40 mm
Accessory
Special tool holder RH ø 12x60 mm
Accessory
Special tool holder RH ø 12x40 mm
Accessory
Tool holder RH ø 12x50 mm
Accessory
Tool holder RH ø 12x80 mm
Accessory
External joint for boring bar Ø 30 mm
Accessory
Tool holder LH Ø 12x100 mm
Accessory
Tool holder RH ø 12x60 mm
Accessory
Tool holder RH Ø 12x40 mm
Accessory
Special tool holder RH ø 12x60 mm
Accessory
Special tool holder RH ø 12x40 mm
Accessory
Tool holder RH ø 12x50 mm
Accessory
Tool holder RH ø 12x80 mm
